Engenius EWS360AP Neutron Series Dual band Wireless AC1750 Managed Indoor Access Point

New

High transmit power for longer range and enhanced wireless coverage
Supports IEEE 802.11a/b/g/n and ac (draft) standards. Up to 450 Mbps on 2.4 GHz and up to 1300 Mbps on 5 GHz
Seamless Roaming, Fast Handover
6 internal MIMO antennas / Dual band / Three Stream

More details

฿ 0

Add to wishlist

Data sheet

Hardware Radio I: 11b/g/n: 2.412~2.484 GHz
Radio II: 11a/n: 5.18-5.24 and 5.26-5.32 and 5.5-5.7 and 5.745-5.825 GHz
Frequency Bands 2.4 and 5 GHz Frequency Bands
Wireless Wireless Mode: 11a/11b/11g/11n/11ac (draft)
Channel selection (settings vary by country)
Channel bandwidth (Auto, 20 MHz, 40 MHz)
Data Rate Up to 450 Mbps in the 2.4 GHz frequency band; Up to 1300 Mbps in the 5GHz band
IEEE Standards IEEE 802.11a/b/g/n/ac
Wireless Security WPA/WPA2 Personal (WPA-PSK using TKIP or AES)
WPA/WPA2 Enterprise (WPA-EAP using TKIP)
802.1X RADIUS Authenticator: MD5/TLS/TTLS, PEAP
SSID broadcast enable/disable
MAC Address Filtering, Up to 50 fields
L2 Isolation (Access Point mode)
CPU / RAM Memory: 128MB
Flash Memory: 16MB
เสาอากาศ 3 x 3 dBi 2.4 GHz internal antennas
3 x 5 dBi 5 GHz internal antennas
Power Requirements Power Supply: 100 to 240 VDC ± 10%, 50/60 Hz
(depends on different countries)
Active Ethernet (Power-over-Ethernet, IEEE 802.3at)
Power Adapter (United States) 48VDC/0.375A
Device: 12V/2A
Modulation Technology OFDM: BPSK, QPSK, 26-OAM, 64-QAM, DBPSK, DQPSK, CCK
Operating Channels 2.4 GHz: US/Canada 1-11
5 GHz: Country dependent for the following ranges:
36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165
Physical Interface 1 x RJ-45 Gigabit Ethernet (10/100/1000 Mbps) - PoE capable
1 x Reset Button
1 x Power Connector
Operation Modes Access Point, Mesh AP (available soon)
SSID-to-VLAN Tagging Supports 802.1q SSID-to-VLAN tagging
Wireless Management (with Neutron Series Switch) Access Point Auto Discovery and Provisioning
Access Point Auto IP Assignment
Access Point Cluster Management
Remote Access Point Rebooting
Access Point Device Name Editing
Access Point Radio Settings
Band Steering
Traffic Shaping
Cont-1 Fast Handover
Fast Roaming
Access Point Client Limiting
Mesh Network*
Wireless Security (WEP, WPA/WPA2 Enterprise, WPA/WPA2 PSK)
VLANs for Access Point- Multiple SSIDs
Guest Network
Access Point Status Monitoring
Cont-2 Wireless Client Monitoring
Wireless Traffic & Usage Statistics
Real-time Throughput Monitoring
Visual Topology View
Floor Plan View
Map View
Secure Control Messaging
SSL Certificate
Local MAC Address Database
Cont-3 Remote MAC Address Database (RADIUS)
Unified Configuration Import / Export
Bulk Firmware Upgrade Capability
Intelligent Diagnostics

* Mesh networking mode available soon as a free firmware upgrade
Temperature Range Operating: 0 to 50ºC (32º to 122ºF)
Storage temperature: -20ºC to 60ºC (-4Fº to 140ºF)
Humidity (non-condensing) Operating: 90% or less
Storage: 90% or less
ขนาด / น้ำหนัก Weight: 0.80 lbs.
Length: 6.5”
Width: 6.5”
Height: 1.64”
รับประกัน 2 ปี

More info

The EWS360AP can operate as a stand-alone Access Point connecting to third-party PoE-capable switches but more control and versatile management of the Access Point is achievable when it is part of an EnGenius Neutron Series Wireless Network Management solution because the AP includes firmware that enables it to be immediately discovered, configured, monitored and managed from a compatible Neutron Series PoE+ Switch (EWS5912FP, EWS7928FP or EWS7952FP). This capability enables IT managers to deploy and manage up to 50 EWS360APs from a Neutron Series Switch allowing for simplified management from one browser-based interface including simultaneous firmware upgrades, clustering, traffic monitoring, bandwidth steering and many other features that can be reset or reconfigured from the convenience of the IT manager’s desktop.

Operating in both the 2.4 GHz and 5 GHz frequency spectrums and supporting 802.11a/b/g/n and ac (draft) standards the EWS360AP features wireless speeds up to 450 Mbps on the 2.4 GHz radio and up to 1300 Mbps on the 5 GHz radio, a Gigabit port for connecting to 802.3at-capable PoE Switches, and an enhanced receive sensitivity MIMO (Multiple In/Multiple Out) antenna array. As the EWS360AP is designed for deployments on ceilings where power outlets may be scarce, it also comes equipped with PoE (Power-over-Ethernet) IEEE 802.3at for use with an 802.3at-capable PoE injector or 802.3at-capable PoE Switches, drawing up to 22 watts of power. As a result, the EWS360AP is ideal for spacious environments such as large homes, small and medium-sized businesses, multiple-floor offices, hotels, hospitals, and other multi-floor buildings. 


High Power, Long-Range and Multiple Floor Penetration
High transmit power on each band provides more than twice the wireless coverage over mainstream competitors and enables the wireless signal for faster connectivity to client devices and enables the wireless signal to penetrate floors, ceilings, and walls. Internal MIMO antenna array provides better reception and performance as clients change their orientation.
Seamless Roaming, Fast Handover
Keeps client devices connected as they roam within the network.
Wireless Traffic Shaping
Gives IT managers the ability to restrict bandwidth on each frequency as necessary.
SSID-to-VLAN Tagging
Can be configured to broadcast up to 16 SSIDs (8 SSIDs per frequency band). Each SSID can be tagged to a specified network VLAN for different user access tiers based on established access rights.

Reviews

No customer comments for the moment.

Write a review

Engenius EWS360AP Neutron Series Dual band Wireless AC1750 Managed Indoor Access Point

Engenius EWS360AP Neutron Series Dual band Wireless AC1750 Managed Indoor Access Point

High transmit power for longer range and enhanced wireless coverage
Supports IEEE 802.11a/b/g/n and ac (draft) standards. Up to 450 Mbps on 2.4 GHz and up to 1300 Mbps on 5 GHz
Seamless Roaming, Fast Handover
6 internal MIMO antennas / Dual band / Three Stream

Write a review